Thousands of Geelong roofs still carry the small systems that went up in the early solar boom: a couple of kilowatts, an inverter on the garage wall, and a feed-in deal that has long since ended. Those systems still make power. Whether they still suit the house is a different question, especially if you’ve added air conditioning, swapped gas for electric, or bought an EV.
There are three ways to go: keep the system and fix what’s failing, expand it, or replace it with a new one. The age of the system decides more than you might think. If nothing has been installed at your address in the last 10 years, and the address has never had a Solar Homes panel rebate, you may qualify for Solar Victoria’s rebate of up to $1,400 on a replacement or expansion. Bizsolar assesses older systems across Geelong, the Bellarine and Ballarat and quotes all three options.
How do you know an older system needs attention?
Start with your monitoring or the inverter display. A steady fall in output year on year is normal; panels lose a little each year. A sudden drop, a red fault light or an inverter that shuts down on hot afternoons is not.
Other signs are about fit rather than faults. If your bills have climbed since you installed solar, your usage has probably outgrown the system. A 1.5 or 2 kW system made sense when most homes heated with gas. It covers a small slice of an all-electric home, and from 1 March 2027 Victorian homes must replace a failed gas hot water system with an efficient electric one.
Option 1: Keep it and fix what’s failing
If the panels are sound and only the inverter has failed, a like-for-like replacement can keep the system going for less outlay. Look at the numbers carefully, though. The Clean Energy Regulator’s list of STC-eligible upgrades covers adding panels, new panels with a new inverter, a separate system, or a full replacement. An inverter swap on its own isn’t on that list, so expect to pay full price for it.
This option suits a system that still matches your usage and has a few good years left in the panels.
Option 2: Expand the system
You can add panels to an existing system in two ways. If your current inverter has spare capacity, new panels can connect to it. If not, a new, larger inverter can run the old and new panels together. Both can earn STCs on the new panels, as long as the total stays under the scheme limit and the new parts are on the approved list. The existing panels don’t earn certificates again.
There is a catch with mixing old and new. Newer panels are larger and more powerful, so matching them to an old array takes care. Any changes to an existing system, other than a like-for-like swap, also mean the whole system must meet Victoria’s emergency backstop rules, which generally need an internet-connected, compliant inverter. The installer must re-certify the whole system as safe and compliant, not just the new part.
A third version is a separate second system: new panels and a new inverter alongside the old ones. It can make sense when the old system works but the roof has room for more.
Option 3: Replace it entirely
For many systems installed before 2017, replacement is the cleanest choice. A new system counts as a replacement system for STCs, provided every panel and the inverter are new. If the address hasn’t had solar installed in the last 10 years and has never received a Solar Homes PV rebate, Solar Victoria says you may be eligible for its rebate on replacing or expanding panels. The usual conditions apply: owner-occupier, combined household income under $150,000, property under $3 million.
Replacement also lets you design for the way you use power now. Pairing it with a battery is often worth modelling, and our solar battery rebate guide explains how the 2026 discount works.
| Option | Usually suits | STC eligible? | Solar Victoria rebate? |
|---|---|---|---|
| Fix the inverter | Panels sound, usage unchanged | Not listed by the CER as an eligible upgrade | No |
| Add panels to existing inverter | Inverter has spare capacity | Yes, on new panels | Possibly, if 10+ years since install |
| New inverter plus extra panels | Old inverter near end of life, roof has room | Yes, on new panels | Possibly, if 10+ years since install |
| Full replacement | Small or failing system, higher usage now | Yes, as a replacement system | Possibly, if 10+ years since install |
What has changed since your first system went in?
Almost everything about how solar earns its keep. Victoria no longer has a regulated minimum feed-in tariff, so exported power earns little; one major retailer now pays 1.5 cents per kWh on its single rate. Using your own solar matters far more than exporting it.
The network has changed too. Powercor, which serves Geelong, the Bellarine and Ballarat, has offered flexible exports since 1 July 2026 to customers who would otherwise get a zero export limit. Victoria’s Midday Power Saver, available from 1 October 2026, gives free grid power from 11am to 2pm to households that opt in. For a home with a small old system, that plan can be worth comparing with an upgrade, although rates outside the free window may be higher.
How Bizsolar handles upgrades?
We check what you have before we suggest what you need. That means reading the inverter, inspecting the panels and wiring, and comparing your current output with your bills. If your system only needs a repair, we’ll tell you.
From there we can quote a repair, an expansion or a replacement side by side, with STCs, any Solar Victoria rebate and the backstop setup shown as separate lines.
FAQs
How do I find out when my solar system was installed?
Ask your electricity distributor (Powercor in Geelong and Ballarat) for the connection date, or request a historical Certificate of Electrical Safety from Energy Safe Victoria. Solar Victoria suggests both. Bizsolar can help you find it during the assessment.
Can I get the Solar Victoria rebate if I already have solar?
Possibly. Solar Victoria says systems 10 or more years old may be eligible for a rebate to replace or expand panels, as long as the address hasn’t previously received a Solar Homes PV rebate. We’ll check your eligibility before you apply.
Can I just add more panels to my old inverter?
Only if the inverter has spare capacity and is on the approved list, and the new panels meet current standards. Many older inverters are too small. We check the inverter rating on site.
Will upgrading change my feed-in tariff?
It can. Retailers set their own feed-in tariffs now, and an upgrade may require a new connection agreement and export limit. Check with your retailer before you upgrade, and we’ll tell you what export limit Powercor offers.
Do you upgrade systems in Ballarat as well as Geelong?
Yes. Bizsolar assesses and upgrades older systems across Geelong, the Bellarine Peninsula, the Surf Coast and Ballarat. Our Ballarat solar guide covers local heritage and winter considerations.
Find out what your old system is worth keeping
An older system can be worth fixing, expanding or replacing, and the right answer depends on its age, your usage and the 10-year rebate rule. Book an assessment and we’ll quote the options side by side. Book an upgrade assessment or call 1300 537 363.
